Category Water efficiency

An efficient approach for techno-economic evaluations of membrane technologies in SAGD Central Processing Facilities

Oil sands operators are continuously investigating ways to reduce operating cost, energy use, and associated GHG emi...


Category Natural gas processing

Glycol dehydration modelling and optimization: TEG models and the impact of stripping gas

The upstream oil and gas industry uses glycol dehydrators to remove water from natural gas. The dehydration process...


Category Water efficiency

The water-energy nexus in the oil & gas industry

It has now long been recognized that the demand for energy and water are tightly interconnected and that interventio...


Category Air emissions management

Air emissions and energy in natural gas dehydration: A review of Western Canada’s trends and opportunities

Since the introduction of AER Directive 039 in 2007 to control benzene emissions from glycol dehydration facilities,...


Category Air emissions management

Air emissions compliance and optimization opportunities at Encana

Government agencies throughout the world are revising their emission reporting requirements with more stringent cont...


Search

Categories

Latest Articles

  • September 19, 2019 / James Holoboff, M.Sc., P. Eng.

    If you are responsible for air emissions reporting in Canada, you are likely struggling to keep on t...

  • September 18, 2019 / Ahad Sarraf Shirazi, M.Sc., P. Eng.

    AER issued Directive 081 “Water Disposal Limits and Reporting Requirements for Thermal In Situ...

  • July 05, 2019 / Abhishek Karole, M.Sc.

    Heater treaters are used to further separate water from crude oil emulsions in cases where this cann...