Category Training and support

HYSYS Tips and Tricks: User-Variables to calculate erosional velocity in dynamic simulation models

When modelling piping networks, especially in the presence of loops and parallel piping, HYSYS Dynamics can be easil...


Category Training and support

Dynamic Process Simulation: When do we really need it?

Introduction

Process simulation is the representation o...


Category Training and support

Modelling Piping Networks – HYSYS Steady State, HYSYS Hydraulics or HYSYS Dynamics?

Modelling piping networks can be a challenging engineering task and sometimes it can be a mixture of both science an...


Category Relief / flare studies

Steam generator tube rupture analysis using dynamic simulation

Heat Exchangers are used to transfer heat from a hot fluid to a cold fluid. Most of the times these fluids are avail...


Search

Categories

Latest Articles

  • September 19, 2019 / James Holoboff, M.Sc., P. Eng.

    If you are responsible for air emissions reporting in Canada, you are likely struggling to keep on t...

  • September 18, 2019 / Ahad Sarraf Shirazi, M.Sc., P. Eng.

    AER issued Directive 081 “Water Disposal Limits and Reporting Requirements for Thermal In Situ...

  • July 05, 2019 / Abhishek Karole, M.Sc.

    Heater treaters are used to further separate water from crude oil emulsions in cases where this cann...