Category Training and support

Pipeline engineering studies using dynamic simulation

Designing pipeline systems requires consideration of a number of factors, including the distance to be traveled, ter...


Category Air emissions management

Modeling benzene emissions reductions in condensation tanks

According to the Canadian Association of Petroleum Producers (CAPP), there are over 2,500 operating glycol dehydrati...


Category Oil sands / heavy oil

CO2CEPTS: An Innovative cloud-based tool for evaluation of new technologies in SAGD facilities

New technologies are continuously being developed to improve the economic and environmental performance of Steam Ass...


Category Relief / flare studies

Two flare stacks in one facility? Make sure to consider radiation from one stack to the other stack surface

It is quite common for a facility to have multiple flare stacks with different heights. Consider a sour gas processing facility where there are two...


Search

Categories

Latest Articles

  • September 26, 2018 / James Holoboff, M.Sc., P. Eng.

    Air emissions regulations and reporting requirements for the upstream oil and gas (UOG) industry in...

  • September 25, 2018 / Ahad Sarraf Shirazi, M.Sc., P. Eng.

    It is quite common for a facility to have multiple flare stacks with different heights. Consider a s...

  • August 21, 2018 / James Holoboff, M.Sc., P. Eng.

    The AER officially released the updated Directive 39 (benzene emissions reporting regulation) on Jun...